Pumps using Electric Motors up to 1 Kw and the way they run

Our world runs with a varied range of motors, like the stepper motors, we know and get to see some of them and some work in the background powering up every movable thing around us. Pumps are utilised usually to lift water and other liquid substances from a certain level to a higher level storage space. The motors of the water pumps fall under the electric motors up to 1 Kw range. So, get ready to explore, how they push the pumps to perform at their best.

Submersible water pumps with motors up to 1 KW are handled very carefully, as there is always a chance of making a minute mistake that might cost heavily in the future. The possible voltage supply and version of the electrical motor needs to be noted down, before the pump is used inside a bore-well. It helps you get ready for any possible mishaps, in restoring the motor and pump, as well as claiming for a replacement or repair service, according the manufacturer’s norms.

The information of the electric motor for a submersible or any other kind of pump is mentioned as below format. Purchasers need to carefully save the information and understand what that means. For examples the motor type series is denoted as UMA 200 D-45/2 1, where UMA describes the motor type, 200 is the motor size in mili meters, D represents the design status, 45 is the maximum rated power in KW for 50 Hz, here number of poles is indicated by 2 and 1 represents the winding insulations of the electric motor.

Be careful to maintain the power consumption under control and maintain the motor properly to have a longer period of service from the submersible pump.